banner



How To Stop Bsod Windows 8

This guide shows you how to fix blue screen of death errors (or BSoD errors) for Windows 8.

Contents

  • one Mutual fixes
  • 2 INACCESSIBLE Kicking DEVICE
  • 3 NTFS FILE SYSTEM
  • iv SYSTEM THREAD EXCEPTION Not HANDLED
  • five KERNEL MODE EXCEPTION Not HANDLED
  • 6 PAGE Error IN NONPAGED Area
  • seven Driver IRQL Non LESS THAN OR EQUAL TO
  • 8 THREAD STUCK IN DEVICE Driver
  • 9 More Information
    • 9.1 Linked Entries
    • ix.2 Back up Links
    • ix.three Applicable Systems

Common fixes

In Windows 8, most Blue Screen of Decease errors tin can be fixed past using Organisation Restore (if enabled and a restore point is available) or by removing the recently installed software or driver that caused the error and rebooting Windows 8.

Method #1: Use Organisation Restore

Follow the steps from Restore Windows 8 guide on how to restore the organization.

Method #2: Install updates

If Windows updates aren't installed in Windows viii, y'all need to practice and then manually:

  1. Click Settings (press Windows key and C to open up the console with the Settings icon)
  2. Click Change PC settings
  3. Click Update and recovery
  4. Click Windows Update
  5. Click Install updates

Method #3: Windows 7 instructions

Follow the tips from Windows vii fifty-fifty if you have Windows viii, for those steps that are available for your organization.

Method #4: Remove contempo software or drivers

Uninstall from your system any recently installed software, utility tools or device drivers.

INACCESSIBLE Kicking DEVICE

The INACCESSIBLE_BOOT_DEVICE error in Windows 8

To fix the blue screen error with the proper name "INACCESSIBLE_BOOT_DEVICE", try any of the following fixes explained beneath:

Gear up #ane: Run the chkdsk command

You demand your original Windows 8 installation disc for this:

  1. Insert the installation disc
  2. Restart your PC
  3. Printing any primal to kick from the disc
  4. Click Repair your computer
  5. Select Troubleshoot, then Advanced Options, then Command Prompt
  6. Type this command:
    chkdsk /f /r
  7. Hit Enter

Set up #2: Reconfigure BCD

If the Boot Configuration Data (BCD) has been damaged, rebuild it:

  1. Boot from the original install deejay
  2. Click Repair your computer
  3. Choose Troubleshoot, then Command Prompt
  4. Blazon the following commands:
    bootrec /fixmbr bootrec /fixboot bootrec /scanos bootrec /rebuildbcd
  5. Type go out and remove the installation deejay from the disk tray
  6. Hitting Enter
  7. Restart the computer

If you don't have the installation disk, use Like shooting fish in a barrel Recovery Essentials to rebuild the BCD:

  1. Download Like shooting fish in a barrel Recovery Essentials from here. Cull your Windows version (XP, Vista, vii or viii) before you go to download
  2. Burn down the epitome. Follow these instructions on how to fire the bootable ISO image very carefully, as making a bootable CD can exist catchy!
  3. Boot into Like shooting fish in a barrel Recovery Essentials
  4. Choose Automatic Repair option and click Proceed

    Easy Recovery Essentials Automated Repair

  5. Choose your Windows installation drive's alphabetic character (usually C:\) and click Automatic Repair
  6. Wait for Easy Recovery Essentials to consummate the process

    Easy Recovery Essentials Repair Complete

  7. Once the process is consummate, click Restart

If the to a higher place commands do not ready the INACCESSIBLE_BOOT_DEVICE error, try the steps to set the Windows viii′ EFI bootloader:

  1. Restart your reckoner and boot from the installation disk
  2. Click Repair your computer, then Troubleshoot, and then Command Prompt
  3. Blazon these commands in Command Prompt:
    diskpart sel disk 0 listing vol
  4. The EFI partition is formatted under the FAT32 system. Check for the volume item that has "FAT32" in the "Fs" cavalcade.
  5. If the volume number of EFI partition is "i", type the following command:
    sel vol 1
  6. Assign a letter to this partition, one that is non bachelor, for example x:\. Type this command to assign the letter:
    assign letter=x:
  7. When the success message appears ("DiskPart successfully assigned the drive letter or mount signal."), type exit to quit the DiskPart utility
  8. Type the adjacent command, but remember to replace x: with the partitioning's letter you chose earlier:
    cd /d x:\EFI\Microsoft\Kicking\
  9. Blazon the bootrec command:
    bootrec /fixboot
  10. Backup the erstwhile BCD with this control:
    ren BCD BCD.backup
  11. Recreate the BCD, only remember to replace x: with the partition'due south letter you chose before:
    bcdboot c:\Windows /l en-u.s.a. /s x: /f ALL
  12. Type exit and remove your installation disk from the disk tray
  13. Restart your figurer

Fix #iii: Check for faulty RAM module or hardware

If y'all take multiple RAM modules, try remove all of them except one and reboot your organisation.

Likewise, if you recently added a new piece of hardware to your PC, remove information technology and reboot the system.

NTFS FILE Organisation

The Blue Screen of Death (BSoD) fault with the name of "NTFS_FILE_SYSTEM", in Windows eight, usually appears if your hard disk has data corruption.

Y'all can endeavour to ready this error by following any of the below methods:

Method #ane: Run the chkdsk command

You need the original Windows viii installation disk to run Control Prompt:

  1. Insert the disc and restart your PC
  2. Press any primal to boot from the disc
  3. Click Repair your computer
  4. Select Troubleshoot, and so Avant-garde Options, and then Control Prompt
  5. Type this control:
    chkdsk /f /r
  6. Hit Enter

Method #2: Check the cables

Brand certain all your hard disk cables are connected properly.

Method #3: Reinstall Windows or supersede the hard disk

If Method #i or Method #2 in a higher place exercise not fix the mistake, you reinstall Windows 8 or replace your hard disk with a new one.

Arrangement THREAD EXCEPTION NOT HANDLED

This Bluish Screen of Expiry (BSoD) error, System Thread Exception Not Handled, mostly appears considering of incompatible graphics drivers.

The SYSTEM THREAD EXCEPTION NOT HANDLED error in Windows 8

Yous can gear up this error in Windows 8 by rebooting into Safe Mode and and then uninstalling the electric current graphics driver and installing the latest version available from the vendor.

  1. Restart your computer
  2. Press the F8 key (or Shift + F8)
  3. Click Repair your figurer
  4. Click Troubleshoot, and so Advanced options, then Windows Startup Settings
  5. Click Restart
  6. At the Avant-garde Boot Options, select Safe Manner and striking Enter

To proceed with uninstalling the driver, once you booted into Windows 8 Safe Mode, do these steps:

  1. Get to Settings
  2. Click Control Panel
  3. Click Device Manager
  4. Search for the "Display adapters" category from the list
  5. Uninstall the driver available under the Display adapters category by correct-clicking on the available driver and and so clicking Uninstall
  6. Confirm the procedure and await for the commuter to be uninstalled
  7. Restart Windows 8

KERNEL Manner EXCEPTION NOT HANDLED

The Blue Screen of Death (BSoD) errors with the name "KERNEL_MODE_EXCEPTION_NOT_HANDLED" in Windows 8 tin be fixed by post-obit any of fixed explained below.

The KERNEL_MODE_EXCEPTION_NOT_HANDLED error in Windows 8

Beside these fixes, information technology's best to also try some basic troubleshooting techniques:

  • Make sure you have enough infinite on your hard disk drive
  • Check the hard disk drive cables are properly connected
  • If you recently installed a software or a driver, uninstall information technology and reboot
  • If you recently added a new hardware, remove information technology and reboot to check if the error appears again. This error can be caused by incompatible hardware with your organisation.

Set up #1: Update BIOS

Your computer'due south manufacturer website has information about the latest BIOS version you should run on your estimator. If your BIOS electric current version isn't the latest bachelor, upgrade the BIOS and reboot the organisation.

The computer's manufacturer website should accept guides available on how to upgrade BIOS.

Fix #2: Uninstall software or remove hardware

Remove whatsoever hardware pieces yous may have added to your system and reboot. Also, if yous installed something lately, uninstall it and reboot.

If you lot can't boot to remove a commuter or a software program, reboot Windows 8 in Prophylactic Mode to be able to run the uninstall procedure.

Folio Error IN NONPAGED Expanse

The Blue Screen of Expiry (BSoD) error with the name "Folio Fault IN NONPAGED Expanse" can be caused by a faulty hardware with the RAM.

The Page fault in nonpaged area error in Windows 8

To fix this error, try the post-obit tips.

Tip #one: Check RAM and hardware cables

Brand sure the RAM modules are not faulty. Yous tin try removing all modules, except one unmarried module and reboot your Windows 8 system with this only RAM module.

Brand sure that all your hard disk cables are continued properly.

If you added hardware recently, remove it and reboot the system to cheque for a result.

Tip #ii: Uninstall whatever new drivers

Boot your system into Safe Fashion by following the steps below and uninstall any new drivers or software:

  1. Restart your computer
  2. Press the F8 key (or Shift and F8)
  3. Click Repair your computer
  4. Click Troubleshoot, and so Avant-garde options, then Windows Startup Settings
  5. Click Restart
  6. At the Avant-garde Boot Options, select Rubber Style and hit Enter

If, once booted into Condom Manner and at that place is no driver or software to uninstall, open Control Prompt and run the chkdsk command:

  1. Type cmd in the Search Box
  2. Click Command Prompt from the listing of results
  3. Type:
    chkdsk /f
  4. Hit Enter

DRIVER IRQL Not LESS THAN OR EQUAL TO

The DRIVER IRQL NOT LESS THAN OR EQUAL TO error in Windows 8

The Blueish Screen of Death (BSoD) mistake of "Driver IRQL Non LESS THAN OR EQUAL TO" is unremarkably caused by a faulty commuter installed on your system.

To gear up this error, you need to uninstall the commuter or make certain y'all have the latest bachelor version of that driver installed on your organization.

You tin can boot Windows 8 into Safety Mode for this procedure.

THREAD STUCK IN DEVICE Driver

The Blue Screen of Death (BSoD) fault of "THREAD STUCK IN DEVICE Commuter" in Windows eight is usually caused by a loop of the video graphic driver.

The THREAD STUCK IN DEVICE DRIVER error in Windows 8

To fix this error, y'all can endeavor:

  • Make sure your video driver is updated to the latest version.
  • Updating BIOS to the latest available version. Your computer's manufacturer website should accept all the information you need to update BIOS.

If the tips above don't prepare the error for you, consider exchanging the video card.

More than Information

Linked Entries

  • chkdsk
  • bootrec
  • diskpart

Support Links

  • Easy Recovery Essentials for Windows – our repair and recovery disk.

    Information technology's an easy-to-employ and automatic diagnostics disk. It'southward bachelor for Windows 8, Windows 7 and Windows Vista. It's also available for Windows XP and Windows Server.

    Read more at Windows Recovery Disks.

  • The NeoSmart Back up Forums, member-to-member technical back up and troubleshooting.
  • Get a discounted price on replacement setup and installation discs: Windows 8.

Applicable Systems

This Windows-related knowledgebase commodity applies to the following operating systems:

  • Windows eight (all editions)
  • Windows 8.one (all editions)

Advise an edit

Source: https://neosmart.net/wiki/blue-screen-death-bsod-errors-windows-8/

Posted by: bensongazinsibelf1940.blogspot.com

0 Response to "How To Stop Bsod Windows 8"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel